High-Pressure Laminate Desktop
Handmade in Michigan and built to last. A solid particle board core is pressed with high-pressure laminate on both faces and finished with edge banding all the way around.
Threaded inserts fit Apex Two-Leg, Apex Pro and Peak Pro frames, with machine screws supplied with those frames. Pre-drilled pilot holes fit the Peak Two-Leg, with wood screws supplied with that frame. Browse every finish in our HPL Surface Lookbook.
Details: 1.125" thick, 3mm edge banding. 29" x 58" or 30" x 72". Black Riftwood, Smokey Brown Pear, Thermo Walnut, Natural Teak, Planked Urban Oak or Brite White.
Lead time & terms: Ships within 3 business days.
What's normal, and what we'll fix
Every DeskHaus top is pressed, cut and edged by people running machines. We put our money into thicker materials and a fair price, not into making each top look flawless under a magnifying glass. Here's exactly where we draw the line.
The top face is held to our highest standard. Stand at your desk the way you'd use it, about arm's length away, in your room's normal light. If you can see a scratch, chip, dent or blemish from there, we'll make it right. Marks that only show up from a few inches away, at a low angle, or under a flashlight or camera flash are normal manufacturing variation, not defects.
The laminate itself is pressed from layers of decorative paper and resin under heat. Like any pressed material, a sheet can carry a few pinpoint specks or flecks under the surface, smaller than a pencil tip, along with slight variation in pattern and sheen from top to top. Wood-look finishes are printed patterns, so the grain on your top won't match our photos or another top exactly. These are part of the material, not defects. A speck or spot larger than about 1/16" that you can see from arm's length is covered under the top face standard above.
The edges are banded and trimmed by machine. Where the laminate meets the banding, you may see small trim marks, tiny nicks, a faint glue line, or a slight color difference between the banding and the top. These come from the trimming process and are normal, not defects. We'll make it right if an edge arrives with a chip or dent larger than about 1/8" (roughly a grain of rice), or with banding that's lifting or pulling away.
The underside is a handling surface, like the underside of a car. Marks there are normal and don't affect anything.
Check it when it arrives. Before you assemble, look over the top face and edges as described above. If you find something, email support@desk.haus within 3 days (72 hours) of delivery with two photos, taken without flash:
- One from standing height showing the whole top, with the spot circled or pointed to
- One closer up so we can see what it is
We review the standing-height photo first. Keep the box until you've checked everything, and when you assemble, lay the top face-down on the cardboard or a blanket, not a bare floor.
This window covers cosmetic finish only and doesn't change your warranty. Once the top is in use, everyday scuffs and scratches are normal wear, like any furniture.